LDP-9208D/9224DF/9240D User Guide
6
11. Fixed buttons
LDP-9208D does not support some buttons: Flash, Directory, and
Headset among the below buttons.
Flash button: U
se to seize the new line without on-hook.
So you can make a call by dialing the desired number.
Speed button: Use to assign your speed dial numbers.
The button also deletes the last character of an input in
the menu mode such as registering Station name.
Transfer/PGM button: Transfers the current active call
or to enter programming mode.
Directory button: Accesses your private or public
directory for speed dialing.
DND (Do Not Disturb)/FWD button: Use to activate
DND so that your phone will not ring. Use to allow you to
forward all calls to another number by setting the call
forward type (1~4).
Call Back button: When the MWI LED indicates you
have a message, use to access your Voice Mailbox.
Mute button: Toggles audio from the microphone to the
connected party on and off.
Hold/Save button: Use to place a call on Hold. Also, use
to access a held call. In menu mode, it saves your inputs.
Ear Mic. Headset button: When using a Ear Mic.
headset, this button toggles the Ear Mic. headset state.
When the Ear Mic. headset is active, the button LED
illuminates red. Or, press [PGM] +19 and then set ON.
To Next Page
Loading...
Need help?
General
