LG-Ericsson iPECS LDP-9208D User Manual

LDP-9208D/9224DF/9240D User Guide
55
To deactivate Keypad Facility operation:
•
Press
KEYPAD FACILITY
button,
Or,
•
Press a Feature or Flexible button.
9.2.2 Using ISDN Supplementary Services
ISDN service providers may incorporate features similar to
those of Centrex. These ISDN Supplementary services are
provided on a subscription basis, and as with Centrex, are
accessed using the Flash button on a Phone. In case of LDP-
9208D, make the Flash button as Flexible button (the code is
94).
Using supplementary services an ISDN line can be placed on
Hold and a second call placed on the line. You may then
alternate between the two held calls (Broker Call) using the hold
button. An ISDN line conference can be established using the
Flash
and Conf Soft buttons. A conference can also be placed
on hold.
While on an ISDN CO line, to access ISDN Supplementary
services:
•
Press the
Flash
Soft button,
•
Press the
HOLD/SAVE button, Conf Soft button, or
CO line button
to activate the desired feature.
9.2.3 Activating ISDN Caller ID Restriction
LDP-9200 series phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription service of
your carrier. Separate Flex buttons are required to activate
outgoing, Connected Line (COL), and incoming, Calling Line ID
(CLID) restriction.
To assign {CLIR} and {COLR} Flexible button:
TRANS/PGM + {FLEX} + TRANS/PGM + 81 (CLIR) or 82 (COLR) +
HOLD/SAVE
To restrict Caller ID:
• Lift the handset,
• Press programmed CLIR/COLR button to place call.

LG-Ericsson iPECS LDP-9208D Specifications

General

Brand	LG-Ericsson
Model	iPECS LDP-9208D
Category	Telephone
Language	English