LDP-9208D/9224DF/9240D User Guide
28
To Camp-On (wait off-hook) for a busy station:
•
Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:
•
Press the
MSG
soft button or the
CALL BACK
button and hang-
up.
4.1.2 Leaving a Message Wait
If the called user does not answer or is in DND mode, you may
leave a Message Wait. The called user will receive a Message
Wait indication; the message will be displayed in LDP-9200
Series phone. If the ring/message LED is set to Message Wait
Indication, the ring/message LED will flash.
To activate Message Waiting:
• Press the MSG button and hang-up.
4.2 External Calls
4.2.1 Placing External CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’ are
accessed either using a button on the Phone assigned as a
CO/IP line or using dial codes. The CO/IP lines are grouped for
different types of calls, local, long distance, etc. Using the
CO/IP line group code, you will be able to access any line from
the group. A Flex button on the Phone assigned as a
LOOP
button lets you access a line from a group. Dial codes for
access to CO/IP lines are and Dial codes is different according
to Numbering plan:
Individual CO/IP line access—
88 + XX or XXX (XX or XXX are CO line number)
CO/IP Group access—
89 + XX or XXX (XX or XXX are CO Group number)
Any CO/IP Line access—
9 or 0
To Next Page
Loading...
Need help?
General
