LDP-9208D/9224DF/9240D User Guide
38
not answered in a timely manner, the Attendant will receive
Attendant Hold Recall.
To place a call on Hold:
•
Press
HOLD/SAVE
button.
5.3 Broker Call: Switching between two calls
You may switch between the active call and a call on Hold,
placing the active call on Hold acting as a broker between two or
more parties, Broker Call. LDP-9200 series phone users may
‘broker’ for multiple calls for External call up to the number of
CO/IP line buttons. In case of Internal call, LDP-9200 series
phone users may ‘broker’ for calls up to 3 parties.
To switch between two calls for External call (Broker Call):
•
Press the desired CO/IP line button.
To switch between two calls for Internal call (Broker Call):
•
Press the
HOLD/SAVE
button.
5.4 Joining Multiple People in a Conference
You can establish a Conference with up to 13 parties. The other
parties in the Conference may be internal.
A Conference can be placed on Hold and is subject to Hold
Recall.
To assign {Conference} Flexible button for LDP-9208D:
TRANS/PGM + {FLEX} + TRANS/PGM + 91 + HOLD/SAVE
To establish a Conference:
• Establish call with one of the desired conference parties,
• Select the Conf Soft button (9224DF/40D) or press the
programmed
Conf button (LDP-9208D),
• Establish call with the other conference party,
• Select the Conf Soft button or press the programmed Conf
button,
To Next Page
Loading...
Need help?
General
