LDP-9208D/9224DF/9240D User Guide
39
•
Select the
Conf Soft button
or press the programmed
Conf
button
again to establish the conference.
To place a Conference on Hold:
•
Press the
HOLD/SAVE
button.
To retrieve the Conference from Hold:
•
Select the
Conf
Soft button or press the programmed
Conf
button.
To establish an Unsupervised Conference:
•
Establish conference with two external parties,
•
Select the
Conf Soft button
or press the programmed
Conf
button
,
• Hand-up handset.
To retrieve an Unsupervised Conference:
•
Lift the handset,
•
Select the
Conf
Soft button or press the programmed
Conf
button.
5.4.1 Setting up a Conference Room
In addition to establishing a Conference, up to 9 Conference
Rooms can be set up. When setting up a Conference Room, a
password can be designated for invited parties (internal and
external parties) to use for accessing the established Conference
Room.
To set-up a Conference Room:
• Press the TRANS/PGM button,
• Dial 53 to create a Conference Room,
• Dial the desired Conference Room number (1-9),
• If desired enter a 5 digits password for the Conference Room,
• Press HOLD/SAVE to establish the Room.
To join a Conference Room:
• Lift the handset,
• Dial 59 (Conference Room entry code),
• Dial the Conference Room Number,