> COS DOWN MODE
SELECT BY [NEXT]
BACK NEXT OK
To activate COS Down Mode, perform the following:
There are three types as follows, and described in the following
sections,
-COS DOWN MODE
- RESTORE COS MODE
- WALKING COS MODE
2.3.1 COS Down Mode
1
3. STATION COS PROGRAM
4. SPK/HEADSET PROGRAM
BACK OK
To activate Station Class of Service (COS)COS:
With the appropriate selection highlighted,
press the [OK] or button (password is required).
> COS DOWN MODE
ICM ONLY MODE
BACK OK
Press the [OK] or button, the mode will be changed.
Use the [NEXT] or button to select COS DOWN MODE.
Press the [OK] or button.
Menu
34
Obtain password to make sure COS mode can be restored. When set,
only ICM calls can be initiated. COS can be changed back with Restore
COS Mode.
Can be used to return User Station to normal COS after being in COS
Down Mode (password required).
When in use, User can pick-up the COS level of a station after entering
the appropriate password (one-time use).
NOTE
COS DOWN
MODE
RESTORE COS
MODE
WALKING COS
MODE
2.3 STATION COS PROGRAM
To Next Page
Loading...
Need help?
General
