1. Set or Change the Date/Time
2. Change Date Format
3. Attendant Intrusion
To program an Intrusion Flexible button:
The displayed Date and Time can be changed as needed:
• Press the [TRANS/PGM] button.
• Dial 041 (Change Date/Time code).
• Enter the Date as MMDDYY (MM: month, DD: day, YY: year).
• Press the [HOLD/SAVE] button.
• Enter the Time in 24-hour format (4.30pm=1630).
• Press the [HOLD/SAVE] button.
• Press the [TRANS/PGM] button.
• Press the flexible button to be programmed.
• Press the [TRANS/PGM] button.
• Dial 86 (Attendant Intrusion code).
• Press the [HOLD/SAVE] button.
To select a different Date/Time format:
• Press the [TRANS/PGM] button
• Dial 044 (Date/Time Format code) to toggle the formats between DDMMYY and
MMDDYY.
To intrude in a busy line:
• Press the CO button of the outside line; the Intrusion warning tone will be provided to the
busy extension and a 3-way conference call is established.
To intrude on a busy extension:
• When accessing a busy Station, press the programmed Attendant Intrusion button; the
Intrusion warning tone will be provided to the extension and a 3-way conference call is
established.
Attendant Function
43
Similar to the Barge-In feature, Attendant Intrusion allows the Attendant to intrude on a
conversation between an extension and an outside line and create a 3-way conversation. To
use attendant intrusion, Intrusion button is required to use intrusion and attendant intrusion
feature must be enabled in Admin Program (refer to the Administrator Programming manual).
To Next Page
Loading...
Need help?
General
