Attendant Function
6. System Speed Numbers
7. Temporary COS (Class of Service)
To activate a temporary Station COS to restrict CO access.
• Press the [TRANS/PGM] button and dial 022 (Restore COS
code).
• Enter the Station range to be restored (ex., 110113 for
Station 110 – 113).
• Press the [HOLD/SAVE] button to save.
To store System Speed Numbers:
• Press the [TRANS/PGM] button.
• Press the [SPEED] button.
ENTER SPEED BIN NO(2000)
PAUSE FLASH D-TONE
• Dial the desired Speed Bin Number (2000-2499).
• Dial the phone number to be stored.
• Press the [HOLD/SAVE] button to save changes.
ENTER CO-BTN/DIGIT(2000)
PAUSE FLASH D-TONE
• Enter the name (refer to the Character Entry Table).
• Press the [HOLD/SAVE] button to save changes.
1234567
SPEED 2000
PAUSE FLASH D-TONE
JOHN
ENTER NAME (SPD 2000)
PAUSE FLASH D-TONE
2. To restore the temporary COS
•
Press the [TRANS/PG] button and Dial 021 (Temporary
COS code).
• Enter the Station range to be changed (ex., 110113 for
Stations 110 – 113).
• Press the [HOLD/SAVE] button to save.
ICM ONLY MODE
STATION RANGE ?
RESTORE COS
STATION RANGE ?
45
To Next Page
Loading...
Need help?
General
