Attendant Function
4. DND Mode Override
5. Day / Night/ Weekend Mode
When a CO call comes into the system, the destination of CO call can be changed
according to ring mode. There are 5 ring modes:
-Day mode
- Night mode
- Weekend mode
- On-demand Mode
- Automatic Ring mode
The CO call destination can be set differently for each ring mode with ADMIN Programming
(Refer to Administrator Programming manual).
To activate Day / On-Demand / Night / Weekend / Auto mode:
• Press the [DND/FWD] button at the Attendant Station.
The Attendant can override a station in DND:
• When calling a Station in DND mode, the DND tone is heard.
• Dial the * key to override; the Station will receive an ICM ring.
• Select the desired mode by dialing digit 1-5 (1=DAY, 2=NIGHT,
3=ON-DEMAND, 4=WEEKEND, 5=AUTO).
• Press the [HOLD/SAVE] button.
SELECT RING MODE(1-5)
DAY
44