Battery Charge Level
The battery charge level is shown at the top
right corner of the LCD screen. When the
battery charge level becomes low, the low
battery sensor alerts you in up to three ways:
sounding an audible tone, blinking the battery
icon, and displaying a warning message. If the
battery charge level becomes exceedingly low,
the phone automatically switches off and any
function in progress is not saved.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the
phone to an external power source (if
the battery is low).
2. Press and hold for about 2
seconds until the LCD screen lights up.
Turning the Phone Off
1. Press and hold until the display
turns off.
Signal Strength
Call quality depends on the signal strength
in your area. The signal strength is indicated
on the screen as the number of bars next to
the signal strength icon . The more bars,
the better the signal strength. If the signal
quality is poor, move to an open area. If you
are in a building, the reception may be
better near a window.
Screen Icons
To see the icon glossary, go to
Menu
-
>
Settings
-
>
Phone Info
-
>
Icon Glossary
on
your phone.
Making Calls
1. Make sure the phone is turned on.
2. Enter the phone number (include the
area code if needed).
3. Press to dial the call.
4. Press to end the call.
Note
The call quality may also be affected by the places
where you are and weather/ambient conditions.
Getting Started with Your Phone
20
Getting Started with Your Phone
To Next Page
Loading...
