LG ARUN100LT2 User Manual

ENGLISH
LG
Wide Wired Remote Controller
LG
IMPORTANT
• Please read this owner's & installation manual
completely before installing the product.
• Installation work must be performed in
accordance with the national wiring standards
by authorized personnel only.
• Please retain this owner's & installation manual
for future reference after reading it thoroughly.
Owner's & Installation Manual
Models: PQRCUSA0
ITALIANO ESPAÑOL FRANÇAIS DEUTSCH

LG ARUN100LT2 Specifications

General

Brand	LG
Model	ARUN100LT2
Category	Remote Control
Language	English

Summary

Safety Precautions

Installation Safety Guidelines

Warnings for professional installation and avoiding unauthorized changes.

In-Use Safety Guidelines

Cautions against fire, water, and physical shock during operation.

Usage Safety Cautions

Precautions for cleaning, screen use, and handling wires.

Part Description

Remote Controller Components

Details on remote controller buttons and display elements.

Installation Instructions

Cable Connection and Board Mounting

Steps for connecting cables and mounting the installation board.

Securing the Installation Board

Instructions for firm wall mounting of the installation board.

Controller Attachment and Unit Connection

Procedures for controller attachment and connection to the indoor unit.

Extension Cable Guidelines

Information on using extension cables and installation cautions.

Installer Settings - Mode Access

Entering Installer Setting Mode

Step-by-step guide to access the installer setting mode.

Installer Settings - Codes and Functions

Installer Setting Code Table

A table listing function codes and their values for installer settings.

Installer Settings - Test Run

Performing Test Run Mode

Procedure to run a test after installation to verify functionality.

Installer Settings - Addressing

Central Control Address Setting

Guide to assigning addresses for central control integration.

Installer Settings - ESP Function

ESP Function Configuration

Setting the ESP function for wind strength in duct products.

Installer Settings - Thermistor

Thermistor Mode Selection

Installer Settings - Static Pressure

Static Pressure Configuration

Installer Settings - Group Operation

Group Setting Configuration

Setting master/slave roles for group control operations.

Owner's Instructions - Cooling Modes

Standard Cooling Operation

Owner's Instructions - Cooling & Heating

Heating Mode Operation

Owner's Instructions - Other Modes

Dehumidification Mode

Auto Changeover Mode

Owner's Instructions - Auto Operation

Auto Operation Mode Setup

Owner's Instructions - Temperature Control

Temperature Setting and Room Check

Owner's Instructions - Airflow Control

Airflow Direction Setting

Owner's Instructions - Vane Control

Vane Angle Adjustment

Programming - Time Setting

Changing Current Time

Steps to set the current day and time on the remote controller.

Programming - ON Reservation

Setting ON Reservation Time

Programming - OFF Reservation

Setting OFF Reservation Time