Function Code Existing condition
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display “01:01”.
1
Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
3
Press button to save or
release.
4
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
function code.
(20: PLASMA PURIFICATION,
21: DEHUMIDIFIER,
22: ELECTRIC HEATER,
23:VENTILATION KIT,
24: ELEVATION GRILL)
2
For the optional product such as PLASMA PURIFICATION/DEHUMIDIFIER/ ELECTRIC HEATER
and VENTILATION, ELEVATION GRILL.
It is possible to set the items are installed or not
To Next Page
Loading...
Need help?
General
