To Next Page

To Previous Page

Delta Elec. Inc. BS254_BX254_BX324 rev.06

Company Confidential LG ______________________ Delta____________

2011/06/16

Problem: The image is streaked

7. Set the Frequency and Tracking settings on the Computer menu of the OSD to the default

settings.

8. To ensure the problem is not caused by a connected PC’s video card, connect to another

computer.

Problem: The image is flat with no contrast

Adjust the Contrast setting on the Image menu of the OSD.

Problem: The color of the projected image does not match the source image.

Adjust the Color Temperature and Gamma settings on the Image menu of the OSD.

Lamp Problems

Problem: There is no light from the projector

9. Check that the power cable is securely connected.

10. Ensure the power source is good by testing with another electrical device.

11. Restart the projector in the correct order and check that the Power LED is green.

12. If you have replaced the lamp recently, try resetting the lamp connections.

13. Replace the lamp module.

14. Put the old lamp back in the projector and have the projector serviced.

Problem: The lamp goes off

15. Power surges can cause the lamp to turn off. Re-plug power cord. When the Ready LED is

on, press the power button.

16. Replace the lamp module.

17. Put the old lamp back in the projector and have the projector serviced.

Other manuals for LG BS254

Questions and Answers:

Need help?

Do you have a question about the LG BS254 and is the answer not in the manual?

General

Projection distance	0.129 - 2 m
Projection technology	DLP
Contrast ratio (typical)	2100:1
Screen size compatibility	51 \
Projector native resolution	SVGA (800x600)
Resolution	1280 x 1024 pixels
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	260.9 x 186.4 x 71.3 mm
Power requirements	100-240V
Lamp power	180 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Focus	Manual
Focal length range	- mm
RMS rated power	1.5 W
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	-
Ethernet LAN (RJ-45) ports	0
Power consumption (standby)	- W
Power consumption (typical)	205 W