34
By using the Setup menu, you can make various adjustments to items
such as picture and sound. You can also set a language for the subtitles
and the Setup menu, among other things. For details on each Setup menu
item, see pages 34 to 39.
To display and exit the Menu:
Press SETUP to display the menu. A second press of SETUP will take
you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1. Press SETUP. The Setup menu appears.
2. Use v / V to select the desired option then press B to move to the
second level. The screen shows the current setting for the selected
item, as well as alternate setting(s).
3. Use v / V to select the second desired option then press B to move
to the third level.
4.
Use v / V to select the desired setting then press ENTER to confirm
your selection. Some items require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
Menu Language
Select a language for the Setup menu and on-screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.
Original: Refers to the original language in which the disc was recorded.
Other:
To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter. If you enter the wrong language code, press CLEAR.
DVD
Initial Settings
To Next Page
Loading...
