LG G4F-DA2V - Errors on Function Block

Chapter 4. FUNCITION BLOCK
4 - 5
4.4 Errors on Function Block
This shows the errors on the output variable “STAT” of variables and the resolutions in accordance with them.
Function Block
STAT
No.
Local/
Remote
Descriptions
Array
type
Single
type
Resolutions
0
Operating with no fault O O -
1
The base location number is
exceeding the proper setting range
O O
Correct the number in accordance
with the proper range
(See Manual 4.2)
2
H/W error of the base O O Contact the service station.
3
The slot location number is
exceeding the proper setting range
O O
Set the right number to the slot
mounting the D/A conversion module
4
The D/A conversion module on the
slot is empty
O O
Mount the D/A conversion module to
the specified slot
5
The module loaded isn't the D/A
module
O O
Mount the D/A conversion module to
the specified slot
6
The channel number is exceeding
the proper range
- O
Specify the available channel
correctly
7
H/W error of the D/A conversion
module
O O Contact the service station.
8
Local
The D/A conversion module's
shared memory error
O O Contact the service station.
128
H/W error of the communication
module for remote
O
See the manual for the remote
communication module
129
The base location number is
exceeding the proper setting range
O
Correct the number in accordance
with the proper range
(See Section 4.2)
131
The slot location number is
exceeding the proper setting range
O
Set the right number to the slot
mounting the D/A conversion
module
133
The module loaded isn't the D/A
module
O
Mount the D/A conversion module
to the specified slot
135
H/W error of the D/A conversion
module
O
Contact the service station
136
Remote
The D/A conversion module's
shared memory error
O
-
Contact the service station