1. How to Adjust Door Height of Refrigerator
dellats ni ton si rotaregirfer eht fI( .tsrif level rotaregirfer eht ekaM
yam r ood rotaregirfer dna rezeerf fo thgieh eht , r oolf talf eht no
not be the same.
1. If the height of freezer door is lower than that of
refrigerator compartment :
2. If the height of freezer door is higher than that of
refrigerator compartment :
Insert a driver
into the groove of adjusting screw
and rotate driver in arrow direction (clockwise) until the
refrigerator becomes horizontal.
Insert a driver
into the groove of adjusting screw
and rotate driver in arrow direction (clockwise) until the
refrigerator becomes horizontal.
HOW T O INS T ALL REFRIGER A T OR
-16-
1
1
2
2
Adjusting
Adjusting
re v i r D
re v i r D
Even if the height can not be aligned by
using the height adjustment screw,insert
the transparent sheet supplied with the
product.
B ot t e k c a r b m o t
s n a r T par t e e h s t n e
B ot e g n ih m o t
Separate the door with the lower height,
use the (+) type screwdriver to unscrew
the screw at the botton hinge as shown
at figure , insert the transparent sheet
between the bottom hinge and the bottom
bracket,and then fix it with the screw as
shown at figure .
Insert more transparent sheets enough to
align the height.(4 sheets are supplied in
total.)
To Next Page
Loading...
Need help?
General
