83
ENGLISH
[Settings Help]
(Q. Settings) [General] [Settings Help]
If you select the setting menus, you will see the hints of the settings. Turn on/off
description box in settings.
[Screen Saver]
(Q. Settings) [General] [Screen Saver]
When the currently displayed app has not received any user input for an hour, it
will be replaced by a [Screen Saver].
[Reset to Initial Settings]
(Q. Settings) [General] [Reset to Initial Settings]
Return projector to its initial settings. This will revert all settings to their default
values.
After reset, the projector will automatically turn off and on.
• If [Safety] is set to [On], you should type the password to [Reset to Initial
Settings].
• Do not turn off the power during initialization.
• We recommended that you reset the projector to [Reset to Initial Settings]
before you sell it or transfer it to a third party.
[About This Projector]
(Q. Settings) [General] [About This Projector]
You can check the information about Customer Services. (Software Update,
projector Information, and so on.)
To Next Page
Loading...
