39
ENGLISH
MAINTENANCE
Clean your Projector to keep it in optimal condition.
Cleaning
Cleaning the Lens/Mirror
• If there is any dust or staining on the lens /mirror surface, you must clean the
lens.
• To remove dust or stains on the lens/mirror, use a compressed air duster, cotton
swab, or soft cloth to gently wipe the lens.
• Do not wipe the lens/mirror while the product is in use or immediately after it
has been turned off.
• When cleaning the lens/mirror, do not use a cleanser, automobile or industrial
shiner, abrasive, wax, benzene, alcohol, water, etc., as this may damage the
product.
Cleaning the Projector Case
• To clean the projector case, first unplug the power cord.
• To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish
the lens.
• Do not use alcohol, benzene, thinners, or other chemicals, which may damage
the case.
To Next Page
Loading...
