LG keybo 2 - Getting Started with Your Phone; Battery Installation, Removal, and Charging

The Battery
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use in
order to maximize talk and standby
time. The battery charge level is
shown at the top of the LCD screen.
Installing the Battery
To install, remove the battery by
gently pressing the tab on the
back of the phone until the latch
releases the battery door. Insert
the battery face up, and then
replace the battery door.
Removing the Battery
1. Make sure the power is off so
you do not lose any stored
numbers or messages.
2. Press the battery release latch
up, and then remove the
battery from the phone.
Charging the Battery
To use the charger provided with
your phone:
Warning! Use only the charger
provided with this phone. Using
any charger other than the one
included with the
M
M
a
a
s
s
t
t
e
e
r
r
p
p
i
i
e
e
c
c
e
e
may
damage your phone or battery.
1. Plug the end of the adapter
into the phone’s charger port
and the other end into an
electrical outlet.
Note
It is important to fully charge the
battery before using your phone for
the first time.
Getting Started with Your Phone
16
Getting Started with Your Phone
NOTICE
Please make sure that the
"B" Side faces up before
inserting a charger into the charger
port of your phone.