LG LRE3061ST Service Manual

-3-7-
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from inside the oven.
3. To remove the outer broil element:
a) Remove the 4 screws from the front and rear brackets.
* 2 screws of the rear bracket do not only fasten broil heater’s rear bracket
but also a thermistor. While servicing broil elements, the thermistor also
should be disassembled.
b) Pull the element forward so that you can access the terminals and
disconnect the wires.
COMPONENT ACCESS
REMOVING THE BROIL ELEMENT
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
•
RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
WARNING
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
CAUTION
2 upper bracket screws
2 front bracket screws
3 terminals(Broil heater/thermistor)

LG LRE3061ST Specifications

General

Style	single oven, freestanding
Color	stainless steel
Total Capacity	6.3 cubic feet
Induction	no
Number of Oven Racks	2
Number of Oven Rack Positions	7
Interior Light	yes
Fuel	electric

Weight and Dimensions

Depth	28 inches
Height	47 7/16 inches
Width	30 inches
Net Weight	167 pounds