-3-9-
To replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven counterclockwise to
remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by
turning clockwise.
5. Use a screwdriver and bend the
clips on the oven light socket away
from the edges of the liner hole,
and pull the socket out of the liner.
NOTE: If it is too difficult to remove
the socket from the front of the
oven, you will have to push the
socket out from the back of the unit.
6. Disconnect the wires from the
socket terminals.
COMPONENT ACCESS
REMOVING THE OVEN LIGHT & SOCKET ASSEMBLY
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
•
RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
WARNING
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
CAUTION
Glass cover & Bulb
• Be careful not to scratch or chip the oven liner paint
when you remove the oven light socket in the next
step.
CAUTION
Socket Clips
<Viewed From Rear Panel>