→ Input List
or press the INPUT button on the
remote control to display the input
selection screen.
2 Press the red button.
3 Press the or button to go to
the desired input and press the OK
button.
4 Press the , , , or button to
select a device name.
Changing Input Device
To select an external input
Selects external input.
Select SMART
→ Input List or
press the INPUT button on the remote
control to display the input selection
screen.
- Connected inputs are displayed first.
However, AV is always activated.
Select an input signal using the
remote control's INPUT button to
connect the projector to the desired
input. You can use the or button
to switch among all the input modes.
To Next Page
Loading...
Need help?
General
