LG PQRCVCL0Q User Manual

Ownerʼs & Installation Manual 15
ENGLISH
Installation instruction
Installer Setting-Remote Controller Master/Slave Setup
When pressing the button and
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting
mode, select the ceiling height setting code
value by pressing the oper-mode button.
* Remote controller master/slave setting
code value : 07
1
Select the desired setting value with the
temperature up(▲), down(▼) button.
2
When pressing the button, currently
established static pressure value will be
set up.
3
When pressing the button and
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be released.
- If there isn’t any button input for more than
25 seconds, the installer setting mode will
also be released.
4
OPER
MODE
Code value
*Setting value
01:V-H
02:F-H
03:V-L
04:F-L
OPER
MODE
Value
TEMP
FAN
SPEED
OPER
MODE
It is a function for settings in group control, or 2-remote controller control.
Remote controller Function
Master
Indoor unit operates based on master remote controller at group control.
(Master is set when delivering from the warehouse.)
Slave
Setup all remote controllers except one master remote controller to slave at
group control
• When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
h Refer to the 'group control' part for details

LG PQRCVCL0Q Specifications

General

Brand	LG
Model	PQRCVCL0Q
Category	Remote Control
Language	English