TEMP
FAN
SPEED
OPER
MODE
After operating the product by pressing
the button, set up the fan operation by
pressing the button.
1
When the dry operation is selected, “Fn” will
be shown on the display window as shown
on the left side.
- The temperature setting can not be
adjusted during operation this mode.
2
Press the button to select airflow rate
[SLo→Lo→Med→Hi→Po].
When running ventilation, compressor of
AHU doesn’t work.
3
OPER
MODE
FAN
SPEED
Standard Operation - Fan Mode
It blows the air as it is in the indoor, not the cold wind.
• Ventilation drive does not release cool wind but general fan
• Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
• The menu item of wind powerfulness might not be partially selected according to the product.
To Next Page
Loading...
Need help?
General
