CLEANING THE ULTRA MICROFIBER MOP (OPTION)
1. Separate the ultra microfiber mop from the mop plate.
2. Carefully clean it with water.
3. Use the mop only after allowing it to dry completely in a
sunny, well-ventilated area.
To avoid odors, dirt and dust should be washed off the mop after it is used for cleaning. Follow these
directions to wash the ultra microfiber mop:
• To avoid product malfunction, only use the ultra microfiber mop provided with
the Roboking 2.0.
• Additional microfiber mops can be purchased by visiting a nearby LG Electronics service
center.
Tip
To Next Page
Loading...
Need help?
General
