BUTTON FUNCTIONS – REMOTE CONTROL
• The Roboking 2.0’s power supply cannot be turned on with the remote control.
• If the main unit is turned off, the remote control will not activate the unit.
• To turn the cleaner on from the stand by mode or off during cleaning, use START/STOP
button on the top of Roboking 2.0.
• In order to do spot cleaning, timer cleaning, zigzag cleaning, and spatial expansion cleaning,
you must first stop the operation of the Roboking 2.0.
Start
The Roboking 2.0 will start
cleaning
Charging
The Roboking 2.0 will move to the
home station for charging.
Timer
The timer can be set from 1-12
hours in the future. (Page 20)
Stop
If the Roboking 2.0 is in operation
it will be stopped.
If it has been set for timer cleaning,
the reservation will be canceled.
Zigzag cleaning
Cleaning will be performed by
the Roboking 2.0 in the zigzag
traveling fashion. (Page 18)
Spot Cleaning
Cleaning will concentrate
within a space of about 1 m
(3.28 ft). (Page 19)
Directional button
The Roboking 2.0 will move
as desired by the user: to
front, rear, left, and right
sides for cleaning.
Cell by Cell cleaning
The Roboking 2.0 will clean
using the spatial expansion
style.
(Page 18)
Tip
To Next Page
Loading...
Need help?
General
