TROUBLESHOOTING
Proper assembly assures that the rotation of
the brush becomes smooth.
※
For a more detailed description of this process, refer to the instructions on page 25.
When the Roboking 2.0 detects that the brush is not functioning properly, you will hear the message
“Please check the brush.”
Lay a protection cloth on the floor, overturn the Roboking 2.0, and place it on the cloth.
※
Please make sure to remove the dust bin before turning over the main body.
Otherwise, the dust in the dust bin may fall out.
• The side brush is stuck.
Remove any foreign materials such as cables, thread or hair caught in the side brush or the brush.
Confirm the correct assembly of the brush by checking the separation groove of the brush.
• The brush is making a loud, abnormal sound.
Remove the brush from the Roboking 2.0 and remove any foreign material from the brush.
When the voice, “Please check the brush”, is announced
Separation
groove of brush
Separation
groove of brush
To Next Page
Loading...
Need help?
General
