LGL Electronics SPIN1 User Manual

MANUALE DI ISTRUZIONE
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCION
EL K‹TABI
ALIMENTATORE DI FILO A SPIRE SEPARATE
YARN ACCUMULATOR WITH SEPARATE COILS
SCHUSSFADENGEBER MIT GETRENNTEN WINDUNGEN
ALIMENTADOR DE HILO DE ESPIRAL SEPARADOS
‹PL‹K ARASI MESAFEL‹ ‹PL‹K BESLEY‹C‹S‹
VALID FROM SERIAL
n° KPLG 10/0001
取扱説明書
セパレート型コイル式 ヤーンアキュームレータ

LGL Electronics SPIN1 Specifications

General

Brand	LGL Electronics
Model	SPIN1
Category	Camera Accessories
Language	English

Summary

General Features

Main Parts – Control and Adjustment Points

Identifies key components and their locations on the device.

Control Buttons

Explains the function and operation of each control button.

Display Unit

Intended Use – Technical and Operational Features

Installation

Yarn Accumulator Installation

Step-by-step guide for mounting and connecting the device.

Power Supply Box

Details the power supply box and its connection types.

Start-Up and Threading

Offset

Describes the process for calibrating the load cell and setting zero.

Yarn Threading

Guides the user on how to properly thread the yarn through the device.

Quick Start-Up

Provides a simplified procedure for initial setup and tension setting.

Setting the Operating Parameters

Menù Setup

Overview of the main parameters and their settings in the setup menu.

T1-WorkTension1

Sets the yarn reference tension for INC/DEC inputs when enabled.

T2-WorkTension2

Sets the yarn reference tension when INC/DEC inputs are disabled.

TE-TensionError

Defines the maximum allowed yarn tension variation before alarm.

LC- Length Count

Advanced Options (AO-Adv.Options)

Cell Offset Calibration (Offset Calib)

Procedure for calibrating the measuring cell's zero point.

DeviceIDsetting

Device Control via Serial Communication

Device Turn-Off

Hardware Turn-Off

Software Turn-Off

Messages and Alarms

Alarms