loaded vehicle on a slope. Therefore, when
parking the vehicle on a slope, wedge the wheels
for safety.
4.8.4 Quick joint
The pipes of the vehicle are mainly equipped with
Jietong quick joints so as to make the tightness of
brake system better.
△
! CAUTION: The removal of pipe joint
without using special tools may lead to component
damage, and the air tightness will not be
guaranteed when it is refitted.
4.8.5 Operation of inflation joint
Due to the installation of combined air drier, the
pressure regulating valve is integrated with the air
drier, and the inflation joint is installed at the air drier
outlet.
Connect the joint to an inflation hose to inflate tires
and supplement air to air pipes of the vehicle from
outside air source.
4.8.6 Inspection and replacement of dryer
The dryer is able to continuously and effectively
absorb the moisture in the compressed air, so as to
keep the brake system in good operating status.
Drying effects of the installed air dryer have to be
regularly checked.
To Next Page
