EasyManua.ls Logo

LGMG MT86 - Safety Attentions

Default Icon
165 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MT86 Operation and Maintenance Manual
II
Safety Attentions
Operators should understand and follow prevailing national and local safety regulations. In case of no
relevant national or local regulation, safety attentions in this manual will be applicable.
Most accidents are caused by failure of following regulations on machine operation and maintenance. To
avoid accident, please read, understand and follow all warning requirement and notes in the manual and
on the machine before operation and maintenance.
Details of safety measures are explained in Chapter I "Safety".
Since it is unable to predict all possible dangers, therefore, safety explanation in the manual and on the
machine may not include all safety precautions. In case of using steps and operation in this manual, it
should be guaranteed that both the operator and others are safe and the operation would not damage
the machine. If the operation safety is uncertain, please consult the company or dealers.
Precautionary measures on operation and maintenance in the manual are only applicable to using the
machine as specified purposes. If the machine is used beyond the range listed in the manual, our
company will bear no liabilities. All safety liabilities of such operation should be borne by the user and
operator.
Operation prohibited in the manual should not be executed in any circumstance.
Caution signals below are used to indentify safety information in the manual.
! DANGER - If the situation classified as DANGER is not avoided, serious
injury or casualties is likely to occur. This word can also be used when the machine
may be seriously damaged if the possible hazard is not avoided.
! WARNING - If the situation to be warned is not avoided, serious injury or
casualties may occur. This word can also be used when the machine may be seriously
damaged if the potential hazard is not avoided.
! CAUTION If the situation to be noticed is not avoided, minor or moderate
injury may occur. This word is also used when the machine may be damaged or the
service life shortened if the potential hazard is not avoided.

Related product manuals