LGMG MT86 - Door Operation Procedures

MT86 Operation and Maintenance Manual
19
Fig.1-1
Fig.3-2
3.1 Door operation
△
! WARNING: Do not drive unless all doors are
properly closed!
3.1.1 Use door switch outside
Door opening: When the door is unlocked, lift
the handle and pull it outward (as shown in Fig. 3-1)
to open the door; when the door is locked, insert the
key in, turn it anticlockwise for 180º (as shown in
Fig. 3-2), lift the handle and pull it outward to open
the door.
Door closing: Close the door directly.
Door locking: After the door is closed, insert the key
in, turn it clockwise for 180º, and pull out the key; or
before the door is closed, insert the key in, turn it
clockwise for 180º and close the door.
After the door is locked, the door could not be
opened by pull the handle outward.
3.1.2 Use door switch inside
Door opening: Pull the door push button (as shown in
Fig. 3-3) and push the door open.
Door closing: Close the door directly.
△
! CAUTION: While leaving the vehicle,
always make sure that the window and door are
closed and the door is locked. Please keep
valuables with you, rather than leave it behind in
the cab.
Fig.3-3
Fig.3-1
lock
unlock