MT86 Operation and Maintenance Manual
64
minute timer. If the correct conditions for starting the oil
level check are not reached, the range selector keypad will
use the gear display to display one of the following items.
The display shows only two characters at a time.
The engine speed is too
low
The engine speed is too
high
The oil temperature is too
low
The Oil temperature is
too high
Driving speed is not zero
The vehicle is not on the
ground level
Once all the conditions have been reached, the gear display
will display 60 and count down to 0, with a two-minute
timer. After the two-minute countdown is complete, one of
the following is displayed on the gear display and two
characters are displayed at a time.
Description (unit: quart, 1 quart = 1.136
liters)
To Next Page
Loading...
