of the middle rear axle
Periodic maintenance:
The periodic maintenance shall be carried out every
10000km or 1 year after the first maintenance. The periodic
maintenance items are listed as follows:
① Repeat the first maintenance items;
② Replace the hub bearing grease of the front axle
assembly;
③ Lubricate the brake shoe pin and the brake roller;
④ Check the friction plate wear degree. The thickness of the
friction plate shall not be less than 8mm. Replace it if it is
less than 8mm.
△
! Note:
① After maintenance, the user needs to check
the oil level of the grease every additional
5,000km or two months, and refill it at any
time;
② Mixing of grease of different qualities is
prohibited;
③ When performing inspection and maintenance, stop
the engine, park the truck on flat road, apply the
parking brake, and set wedges on both wheels of any
axle to avoid safety accidents.
To Next Page
Loading...
