What causes a Liebert UPS failure and what does it sound like?
A Liebert UPS failure, which includes dual-fan failure, single-fan failure under certain conditions, and battery charger failure, is indicated by a continuous alarm.
What happens when utility power voltage or frequency is out of tolerance for my Liebert UPS?
When the utility power voltage or frequency is out of tolerance, bypass is unavailable, and the Bypass Indicator will flash.
General| Model | Liebert GXT3 |
|---|---|
| Type | Online Double Conversion |
| Frequency | 50/60 Hz |
| Power Factor | 0.9 |
| Battery Type | Sealed Lead-Acid (SLA) |
| Form Factor | Tower |
| Communication Interface | USB, RS-232 |
| Input Voltage | 120V |
| Output Voltage | 120V |
Crucial safety warnings and instructions for handling the UPS.
Precautions for handling, disposing, and working with UPS batteries.
Compliance with FCC rules and EMC Directive for safe operation.
Guidance on environmentally responsible disposal of UPS components.
Safety considerations for UPS installation environment and clearances.
Safety measures for cleaning and maintaining the UPS.
Lists the UPS features and details the available model variants.
Describes the physical layout and components of the UPS.
Explains the UPS internal components and how it functions.
Outlines the different operational modes: Utility, Bypass, Battery, etc.
Steps for unpacking and checking the UPS for damage or missing items.
Pre-installation checks, environment selection, and clearances.
Instructions for tower and rack mounting the UPS unit.
How to connect input power, output loads, and battery cables.
Installing USB and optional IntelliSlot communication cables.
Explains the functions of the UPS's front panel control buttons.
Details the battery and load level indicators on the UPS display.
Explains the meaning of the UPS status indicators (fault, AC input, etc.).
Procedures for powering the UPS on, off, and disconnecting it.
How to perform manual battery tests and activate bypass mode.
Using IntelliSlot, USB, and MultiLink for UPS communication.
Using the terminal block for shutdown commands and signals.
Step-by-step guide for replacing the internal UPS battery pack.
Information on battery charging, long-term storage, and status checks.
Procedures for verifying the UPS's operational functions.
Identifies common UPS symptoms and indicator meanings.
Explains audible alarms and provides solutions for common UPS problems.
Details on optional battery cabinets for extending runtime.
Comprehensive technical data for all Liebert GXT3 UPS models.
Instructions on how to register the product for warranty coverage.
To Next Page
