Need help?Do you have a question about the Liebert Hinet 20kVA and is the answer not in the manual?
General| Capacity | 20 kVA |
|---|---|
| Topology | Double Conversion Online |
| Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz ± 0.1% |
| Battery Type | Sealed Lead-Acid (VRLA) |
| Communication Ports | RS232, USB, Optional SNMP |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 0-95% non-condensing |
| Dimensions | Varies based on configuration |
| Weight | Varies based on configuration |
| Output Voltage | 400/415 VAC (3-phase) |
| Efficiency | ≥93% |
| Battery Runtime | Varies depending on load and battery configuration (typically 5-30 minutes at full load) |
Critical safety precautions for operating the Hinet UPS, covering environmental and handling advice.
Critical safety procedures for handling and maintaining UPS batteries to prevent hazards.
Explanation of how the UPS functions during normal operation, mains failure, and fault conditions.
Instructions for connecting power cables, including safety earth and protective devices for the UPS.
Details on connecting and using the remote EPO function for safety shutdown of the Hinet UPS.
Interpreting UPS status messages during normal operation and alarm conditions on the Hinet UPS.
Step-by-step guide for safely starting up the Hinet UPS from a powered-down state.
Instructions for safely switching off the UPS and performing manual bypass operations.
Procedure to return the UPS from manual bypass mode back to normal inverter operation.
How to use the Emergency Power Off button to immediately shut down the UPS in critical situations.
To Next Page