LifeSize Express User Manual

24 LifeSize Video Communications Systems User Guide
Managing the Display
You can select the video input to show in displays connected to your system.
Selecting Input
To select a new video input to show in the display, follow these steps:
1. Press the near button on the remote control (or navigate to the PIP window and press
OK to enable full screen for the primary input.)
2. Press the near button again or press the button to display the Primary Input
selection dialog containing small representations of the available input sources.
The default primary input is the High Definition Camera (named HD Camera 1 by
default).
3. Accept the default by pressing OK, or change the default value by selecting the desired
input and pressing OK.
4. Press the button to proceed to the Secondary Input selection dialog containing
small representations of the available input source.
The default secondary input is the VGA input (named PC by default).
5. Accept the default by pressing OK, or change the default value by selecting the desired
input and pressing OK.
6. Press the button to return to the main screen and place a call.

LifeSize Express Specifications

General

Brand	LifeSize
Model	Express
Category	Conference System
Language	English