LifeSize Icon Video System Guide 25
Section 4: Maintaining and Troubleshooting
This section describes how to maintain your system and use diagnostic tools for troubleshooting.
System Maintenance
Log in to your video system from a web browser to perform system maintenance.
To shut down your video system, select Diagnostics > System Reboot > System Shutdown .
Saving a System Configuration
1. Select Maintenance > System Reset > System Save .
2. Choose a location to save the configuration file and click Save.
Restoring a System Configuration
1. Ensure that a current, saved configuration file exists before performing a restore.
NOTE Configuration preferences and options vary across software releases.
Restoring a system configuration by using a file saved from a different
software release can produce unexpected results. Only restore a
configuration that was saved from the same software release.
2. Hang up all calls connected to the system. If calls are connected when you perform a restore, you are
prompted to continue or cancel the restore. If you continue, the system restore process terminates the
calls.
3. Select Maintenance > System Reset > System Restore .
You must have a current system configuration saved prior to executing the system restore function or
you will be unable to return to the previous state.
4. Choose a location to save the configuration file and click Save.
Save Maintenance > System Reset > System Save Saving a System Configuration
Restore Maintenance > System Reset > System Restore Restoring a System Configuration
Reset Maintenance > System Reset > System Reset Resetting the System
Revert Maintenance > System Reset > System Revert Reverting the System to the
Alternate Software Version
Update license keys Maintenance > License Keys Updating License Keys
Upgrade Maintenance > System Upgrade Upgrading your System Software
Reboot Diagnostics > System Reboot Rebooting the System
To Next Page
Loading...
