LifeSize Icon 600 - System Navigation and Options

LifeSize Icon Video System Guide 9
Sleep
Select to put the video system, camera, and display to sleep. The video system automatically sleeps
under the following conditions:
• Ten minutes elapse without user interaction.
• A voice call connects.
Tap any key on the remote control to wake the system. When the system wakes, one of the following
options is highlighted, depending on the state of the video system:
– A system issue is present. Select for more information about the issue.
– The do not disturb feature is enabled.
– A call scheduled on LifeSize UVC Manager is available on your video system.
– No other conditions are present.
Navigation and Search
Your LifeSize video system shows call entries and other system information in lists that you can navigate
with the remote control.
NOTE When you select Russian for the language of the video system’s display, the
search uses the Cyrillic alphabet. Select abc to show the Latin alphabet.
Navigate to the top
or bottom of a list
Tap to quickly navigate to the top or bottom of the list.
A bar to the right of the list shows your current position and the total number of entries in
the list.
Search call entries Tap to open a search box to locate call entries.
As you select values, the list is filtered to match any word in an entry’s name that starts
with the filter string. Search box options include:
• Tap to delete a value in the search box.
• Select the # symbol to represent any numeral.
• Select the symbol to insert a space between search entries, allowing you to use
multiple words in your filter.