liftup EasyLift V3 PLUS - Alarm and Emergency Call

USER MANUAL – EASYLIFT V3 PLUS – AU VERSION 09.02
Liftup A/S Hagensvej 21 | DK-9530 Støvring | Danmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR: DK-1015 3964
27
10.9 Alarm and emergency call
The lift can be equipped with an alarm button (optional equipment) that can
summon assistance. In order to activate the alarm, press on the alarm button and
hold it in for approx. 5 seconds.
The alarm button can be connected in several ways:
1. The alarm button is connected to an alarm sensor in the lift
that emits a high-pitch beeping tone that alerts others that
there is a need for assistance at the lift.
Preventive relay output
2. The alarm button is connected to a call system that allows the
user to contact external assistance, either using an analogue
connection or by using a SIM card.
Analogue connection
(SafeLine)
SIM card
(SafeLine)
SafeLine QR
More detailed information regarding the operation and functions
of the SafeLine call system can be found here:
SafeLine MX3: https://www.safeline-group.com/en/qg/mx3
1. Alarm button
(optional equipment)
2. Microphone
3. Status LED for com-
munication module