EasyManua.ls Logo

liftup EasyLift V3 PLUS - 12 Maintenance; Replacement of Battery in Call Stations;Remote Control

liftup EasyLift V3 PLUS
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL EASYLIFT V3 PLUS AU VERSION 09.02
Liftup A/S Hagensvej 21 | DK-9530 Støvring | Danmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR: DK-1015 3964
29
12. Maintenance
Clean by wiping off with a cloth that has been wrung out in water containing a mild detergent.
IMPORTANT!
Do NOT use a high-pressure cleaner or wash the lift down with water straight from a
hose. Aggressive detergents and suchlike must not be used on the lift. Also avoid salt
or sand coming into contact with the lift in connection with winter maintenance.
The accompanying remote control (optional equipment) must be stored in a dry place and not
be subjected to strong impacts by, for example, throwing it about. It must only be cleaned using
a cloth that has been wrung out.
Perform regular checks under the lift for any leaves, branches or other items/objects and
remove these in order to ensure it travels freely.
12.1 Replacement of battery in call stations/remote control
A CR2032 battery is installed in the wireless call stations, call station column (optional
equipment) and remote control (optional equipment).
The battery must be replaced every two years to ensure stable operation.
BE SURE not to swallow the button battery and avoid putting the battery in your
mouth due to the risk of swallowing it.
Keep the batteries out of the reach of small children. If a child swallows a battery,
contact a doctor immediately.
Do not dispose of the battery together with unsorted household waste. When
disposing of batteries, local provisions and regulations must be complied with.

Related product manuals