liftup EasyLift V3 PLUS - 17 Disassembly; 18 Disposal; Material Specification for Easylift; 19 Right of Complaint

USER MANUAL – EASYLIFT V3 PLUS – AU VERSION 09.02
Liftup A/S Hagensvej 21 | DK-9530 Støvring | Danmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR: DK-1015 3964
43
17. Disassembly
In order to ensure correct disassembly for any re-use in another installation, we recommend
using an authorized service technician. Contact your dealer for assistance with disassembly.
Bear in mind that there may be a risk of overturning when the lift is detached from the building
structure.
18. Disposal
The owner is responsible for disposing of the product in accordance with the rules applying at
any time. Be particularly aware that batteries are fitted in the control unit and remote control
and these need to be disposed of separately.
IMPORTANT!
Do not throw the batteries into the waste bin. When you dispose of batteries, local
provisions and regulations must be complied with.
Where necessary, contact your dealer for assistance with disposal.
18.1 Material specification for EasyLift
Material
Included in the following components/parts
1)
Steel (S 235 JR)
Frame, step, frames
2)
, handrails,
Aluminium (Al-Mg G3)
Ramp, cover plates, push plates, frames
2)
, step inserts
Brass (Cu Zn 39 Pb 3)
Bushings, gaskets, handrails
Plastic Polyoxymethylene (POM)
Handrail bushings, slide rails, bushings, gaskets
Plywood
Flooring
Electronics
Controls/PCB, lift columns
Copper
Cables
1)
Call stations, call station columns and other external components are not included.
2)
Depending on the model, frames may be made of steel or aluminium.
19. Right of complaint
The right of complaint encompasses the at any time applicable rules regarding the right of
complaint.
Liftup offers full right of complaint on spare parts for two years provided the product is
registered with Liftup (http://lpr.liftup.dk/).