liftup EasyLift V3 PLUS - Audible Alarms

USER MANUAL – EASYLIFT V3 PLUS – AU VERSION 09.02
Liftup A/S Hagensvej 21 | DK-9530 Støvring | Danmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR: DK-1015 3964
26
10.8 Audible alarms
Speak
Activity/warning
Opening
The vertical safety barrier is opening
Closing
The vertical safety barrier is closing
Alarm: Overload alarm
The platform is overloaded
Alarm: Battery fault – the
lift cannot be used
The battery has a fault. Inadequate power
supply. Cf. section 5 (Technical
Specifications)
Alarm: Something is under
the lift d
Remove the object under the lift which is
preventing downward movement
Ding Ding Ding
Arriving at upper/lower level
Warning
– automatic operation
A warning before the lift will run auto
return
BEEP-BEEP-BEEP…
The lift is in the process of running auto
return
…
Emergency stop pressed
The red emergency stop button has been
pressed in. This must be released in order
that the lift can function again
The lift is locked
The lift is locked with a key switch
Battery warning
Low battery level
Power supply is inter-
rupted – connect or press
emergency stop
Connect to a power supply or activate
emergency stop in order to power off the
lift
High tone followed a deeper tone
Low tone followed by higher tone
Identical tones (3 off)