Lightware SW4-OPT-TX240RAK

8.11. LW3 commands – Quick summary
Video port and crosspoint settings
Operation / Path
8.5.1
Query the video crosspoint setting
/MEDIA/VIDEO/XP.DestinationConnectionList
8.5.2
Switching video input
/MEDIA/VIDEO/XP:switch(<input>:<output>
8.5.3
Query the status of source ports
/MEDIA/VIDEO/XP.SourcePortStatus
8.5.4
Query the video Autoselect settings
/MEDIA/VIDEO/XP.DestinationPortAutoselect
8.5.5
Change the Autoselect mode
/MEDIA/VIDEO/XP:setDestinationPortAutoselect(<output>: <output_set>)
8.5.6
Query the input port priority
/MEDIA/VIDEO/XP.PortPriorityList
8.5.7
Change the input port priority
/MEDIA/VIDEO/XP:setAutoselectionPriority(<input>\(<output>\):<prio>)
8.5.8
Mute an input port
/MEDIA/VIDEO/XP:muteSource(<input>)
8.5.9
Unmute an input port
/MEDIA/VIDEO/XP:unmuteSource(<input>)
8.5.10
Lock an input port
/MEDIA/VIDEO/XP:lockSource(<input>)
8.5.11
Unlock an input port
/MEDIA/VIDEO/XP:unlockSource(<input>)
8.5.12
Mute an output
/MEDIA/VIDEO/XP:muteDestination(<output>)
8.5.13
Unmute an output
/MEDIA/VIDEO/XP:unmuteDestination (<output>)
8.5.14
Lock an output
/MEDIA/VIDEO/XP:lockDestination(<output>)
8.5.15
Unlock an output
/MEDIA/VIDEO/XP:unlockDestination(<output>)
8.5.16
HDCP setting (input port)
/MEDIA/VIDEO/<input>.HdcpEnable
8.5.17
HDCP setting (output port)
/MEDIA/VIDEO/<output>.HdcpModeSetting
8.5.18
Test pattern generator
/MEDIA/VIDEO/<output>.TpgMode|TpgClockSource|TpgPattern
8.5.19
HDMI mode settings (output ports)
/MEDIA/VIDEO/<output>.HdmiModeSetting
HDMI-3D-OPT-TX200 series
User’s manual
LW3 programmers' reference Page 87 / 106