6. Programmer's Reference
6.4. System Commands
6.4.1.
Command and Response
ç
æ
Parameters
The
Example
ç
æ
6.4.2. Setting the Device Label
Unique name can be set which will be visible when the given device is listed in the built-in web page of other
VINX devices. Furthermore, the name is listed when browsing the client list of a DHCP server.
ATTENTION! This property is a writable parameter and not the same as the ProductName.
Command and Response #label #devicelabel
ç
æ
Parameters
The
truncated.
Example
ç
æ
6.4.3.
Command and Response
ç
æ
Example
ç
æ
6.4.4.
Command and Response#rmwareversion
ç
æ
Example
ç
æ
6.4.5. Resetting the Device
The extender can be restarted; the current connections (RS-232, USB, etc...) will be terminated.
Command and Response #reboot #restart #reset
ç
æ
Example
ç
æ
6.4.6. Restoring the Factory Default Settings
Command and Response #factory
ç
æ
Example
ç
æ
The device is restarted, the current connections are terminated, the default settings are restored. See the
complete list in the Factory Default Settings section.
To Next Page
Loading...
