Page 21 of 44
Operation of the DPF1D (Display and up/down drive)
Function:
Compared to a standard DPF1C the DPF1D has no memory positions. The panel is a simple one that will show the height when
adjusting and error codes when needed.
Up and down (^V):
You just either have to activate the up or down button for parallel drive and the system will drive until releasing the button
again or when the system reaches end position.
Display function:
Shows the actual height in either cm or inch and can display error codes
= Parallel up
V = Parallel down
V
93.5
To Next Page
Loading...
Need help?
General
