Page 27 of 44
Error Codes
The DPT has capability of displaying error codes for diagnostic feedback. Below are possible feedback errors, which can be
displayed by the DPT. The error codes will only be displayed when a button is touched in unlocked mode. The display will blink
while showing the error. E16 overrules any other error since the detection is registered only in the display and no message is
sent to the control box. For detailed error description and codes, please see the appropriate CBD software description.
Error no. Description
E01 The desk has an unknown position and needs to be initialised.
E02 Overload in upwards direction has occurred.
E03 Overload in downwards direction has occurred.
E16 Illegal keys are pressed.
To Next Page
Loading...
Need help?
General
