8
Misc. on the TD3 TWINDRIVE
®
system
This system is a TWINDRIVE system developed for leisure beds and for indoor use in
private homes.
Warranty
There is 36 months’ warranty on the TWINDRIVE
®
products against manufacturing
faults calculated from the production date of the individual products (see label).
LINAK A/S’ warranty is only valid in so far as the equipment has been used and main-
tained correctly and has not been tampered with. Furthermore, the system must not
be exposed to violent treatment. In the event of this, the warranty will be ineffective/
invalid. For further details, please see LINAK A/S’ ordinary conditions of sale.
Maintenance
Clean dust and dirt on the outside of the system, at appropriate intervals and
inspect them for damage and breaks.
Inspect the connections, cables and plugs and check for correct functioning as well
as fi xing points.
The cleaners and disinfectants must not be highly alkaline or acidic
(pH value 6-8).
It is not allowed to use solvents for cleaning up.
Max. load running head and foot end motors at the same time in upward
direction is 350 Nm on Head motor, and 200 Nm on Foot end motor.
For customers in the US/Canada:
The mains cable for this product has a polarised plug (one blade is wider
than the other). It will only fi t in a polarised outlet one way. If it does not fi t
fully in the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed
electrician to install a proper outlet. Do not change the plug in any way.
Description of the TWINDRIVE
®
TD3 system
Each TWINDRIVE
®
TD3 unit consists of 2 internal motors and a built-in control,
which makes it a very compact unit. The mains cable is exchangeable. Only the
handset must be paired.
Application of the TWINDRIVE
®
TD3 system:
Irrespective of the load the Duty cycle: 10% ~ 3 min./ hour or max. 2 min. at
continous use followed by 18 min. not in use.
Do not turn on the system if it is not mounted in a bed.
To Next Page
Loading...
