Mounting instructions for the massage motor:
Mounting on plate:
Is mounted with 4 screws
The massage unit is mounted with 4 x 4 mm round-head wood screws with
fl at underside. The head must be 8 mm in diameter and in length 19 mm + the
thickness of the plate on which the massage motor is mounted. Torque max. 2 Nm
+ resistance in the plate.
Massage Motor
Slat
Bracket
Screw
Mounting instructions for the massage motor by using brackets:
The massage unit is mounted with 4 x M6 round-head machine screws with fl at
underside. 15 to 20 mm long + the thickness of the bracket. Torque max. 2-3 Nm.
2 Brackets must be used – one on each side of the slat.
17
To Next Page
Loading...
