31
LINAK APPLICATION POLICY
The purpose of the application policy is to defi ne areas of responsibilities in relation
to applying a LINAK product defi ned as hardware, software, technical advice, etc.
related to an existing or new customer application.
LINAK products as defi ned above are applicable for a wide range of applications
within the Medical, Furniture, Desk, and Industry areas. Yet, LINAK cannot know all
the conditions under which LINAK products will be installed, used, and operated, as
each individual application is unique.
The suitability and functionality of the LINAK product and its performance under
varying conditions (application, vibration, load, humidity, temperature, frequency,
etc.) can only be verifi ed by testing, and shall ultimately be the responsibility of the
LINAK customer using any LINAK product.
LINAK shall be responsible solely that the LINAK products comply with the
specifi cations set out by LINAK and it shall be the responsibility of the LINAK
customer to ensure that the specifi c LINAK product can be used for the application
in question.
To Next Page
Loading...
Need help?
General
