User Manual
Lubrigun Pumps 50:1
7.3A-38010-C05
Page 3 of 22
Subject to change
LINCOLN GmbH & Co. KG
∗
Postfach 1263
∗
D-69183 Walldorf
∗
Fax + (49) 6227 33259 ∗ Tel + (49) 6227 330
2. Safety Instructions
for Pumps and Pump Units
2.1 General Safety Instructions
This Operating Instructions Manual contains important
information about the equipment on set-up, operation
and maintenance.
Therefore, this Manual shall be read by the Fitter,
Technical Personnel, the Owner\Operator prior to
erecting and operating this equipment.
Follow instructions and heed Warnings.
This Manual must always be at hand at the place of use
of the equipment.
All safety instructions contained in this main chapter
‘Safety Instructions’ as well as safety instructions in
other chapters must be observed.
Hazard Markings in Operating Instructions
Warnings that may result in serious personal injury if
ignored, are marked in the Manual by symbols as
follows:
Warnings for exposure to hazards marked by
Safety Symbol according to DIN 4844-W9
Warnings for exposure to electrical hazards marked by
Safety Symbol according to DIN 4844-W8
Safety instructions that might result in equipment
damage and machine malfunction if ignored, are
marked by the word
CAUTION
Heed safety instructions and Warnings attached to the
machine. Keep them complete and perfectly legible.
Qualification of Personnel and Training
The staff responsible for operation, maintenance,
inspection and installation must be adequately qualified
for these jobs. The user must properly regulate the field
of responsibility and supervision of the personnel. If the
personnel is not in command of the necessary
expertise, they must receive appropriate training and
instructions. If necessary, this can be done by the
manufacturer/supplier on behalf of the machine user.
Furthermore, the user must ensure that the contents of
the of the Operating Instructions Manual are fully
understood by the personnel.
Hazards on Disregard of Safety Instructions
Failure to heed the safety instructions and warnings
may result in damage to equipment and the
environment and/or serious personal injury.
Failure to observe the safety notes may result in the
loss of all claims for damage.
As an example, we list some dangers that may result
from failure to observe these instructions and warnings:
• Hazards by malfunction of the equipment/machine.
• Hazards generated by neglecting specified methods
for maintenance and repair.
• Personal injury effected by electrical, mechanical
and chemical hazards.
• Danger to the environment due to leakage of harmful
materials.
Operating Precautions
The safety instructions given in this Operating
Instructions Manual, the prevailing national regulations
for the prevention of accidents and any internal
directives of the user concerning the plant and the
prevention of accidents must be observed.
Safety Instructions for the User/Operator
• In case of thermal hazards by hot (or cold) machine
parts, the owner/user must take care of guards
preventing direct contact of those sections.
• Do not remove safety guards/devices for moving
parts while the machine is in operation.
• Avoid hazards to persons and environment by
leakage of harmful materials. Always collect material
for disposal according to the regulation of the
national authorities.
• Never expose to electrical hazard. Equipment and all
operations must be in compliance with applicable
engineering rules and regulations (for details refer
for example to applicable specifications of your
national board of electr. engineers, the local electric
power supply companies etc.).
Safety instructions
for Maintenance, Inspection and Installation Services
The owner/user must make sure that all maintenance,
inspection and installation work are executed by
authorized and qualified experts who have thoroughly
read the Operating Instructions Manual.
Any work servicing the equipment must be done while
the machine is not in operation and is shut down. Follow
the instructions for shutting down the machine.
Decontaminate pumps/pump units used for pumping
harmful materials.
Guards and safety devices must be re-installed
immediately after completion of servicing the
equipment.
Dispose of harmful materials/consumables according to
the regulation of the national authorities.
Always observe instructions of the sections ‘Initial
Operation’ before operating the equipment.
To Next Page
Loading...
